The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

ICF研究中的Rayleigh-Taylor不稳定性实验用靶

 概述了当前研究Rayleigh-Taylor不稳定性增长实验所用的靶型情况。从实验用靶来看，调制靶的设计正从平面向立体发展，出现了球形和柱形等新靶形，制备手段包括精密机械微加工、激光束、电子束和离子束加工、半导体工艺和微米纳米技术加工等。根据对国外新靶型的研究，结合国内工艺条件和实验需求，对国内可能采用的靶型进行了研究探索。     

Identification of chlorinated sulfur compounds in pulp mill effluents by GC-MS and GC-AED

Summary Three chlorinated dimethyl sulfones and five chlorinated thiophenes have been identified in the alkaline extraction liquor from a bleach plant by gas chromatography with atomic emission detection (GC-AED) and with mass spectrometry (GC-MS). The information on elemental content obtained by GC-AED enabled a rapid screening of the sulfur compounds and provided important structural information complementary to the mass spectral data. Quantitation was accomplished by GC-AED based on universal calibration.     

Effect of the shear rate on pullulan production from beet molasses by Aureobasidium pullulans in an airlift reactor

The effect of the shear rate on pullulan production from beet molasses by Aureobasidium pullulans P56 in an airlift reactor was investigated. A maximum polysaccharide concentration (18.5 g/L), biomass dry weight (14.0 g/L), polysaccharide yield (38.5%), and sugar utilization (96%) was achieved at a shear rate of 42 s⁻¹. A. pullulans grown on beet molasses produced a mixture of pullulan and other polysaccharides. The highest value of pullulan proportion (30% of total polysaccharide) was obtained at a low shear rate (42 s⁻¹). The apparent viscosity of the fermentation broth increased as the shear rate increased up to 42 s⁻¹ and then decreased. On the other hand, the dissolved oxygen concentration and the volumetric mass transfer coefficient increased with the increase of the shear rate from 21 to 84 s⁻¹. The external addition of L-glutamic acid, olive oil, and Tween-80 improved significantly the production of crude polysaccharide (27.0 g/L), but the pullulan content of the polysaccharide was low (20%).     

Automatic sugar analysis in the beet industry. Part I: Parameter optimization of a reversed phase HPLC carbohydrate determination

An evaluation of the most commonly used HPLC system (reversed phase octadecyl sillica gel) was undertaken in order to determine the level of certain carbohydrates in molasses produced in the refining of sugar beet. Chromatographic parameters and purification operations prior to analysis are discussed in order to develop an analytical method permitting automation of sugar determination. A Zorbax ODS column (250 × 9.4 mm), water elution, and light scattering detection allow easy determination of glucose + fructose, sucrose, and raffinose in molasses using an internal standard (maltose).     

Tying together the ultrastructural modifications of wood fibre induced by pulping processes with the mechanical properties of paper

The composition and ultrastructural arrangement of cell wall polymers in wood fibres have determining influence on the properties of wood derived materials. It is therefore important to improve our understanding of the relationship between fibres organisation, the modifications induced by pulping treatments, and the resulting paper sheet mechanical properties. The different treatments to which fibres are subjected during the manufacturing of pulps and papers induce morphological and micro-structural alterations due to the removal of wall constituents and of microfibrillar elements. The impact of pulping processes on fibres was investigated at the ultrastructural scale of transmission electron microscopy. Particular attention was given to the effects of beating in refiners at various intensities on the ultrastructure of fibres. The most characteristic effects consisted of delaminations, microfibril disorganisation, and even fractures, of varying importance depending on the intensity of the mechanical refining. The consequences of internal alterations and surface modifications of the fibres were examined in relation to the paper sheet mechanical properties. Correlations between the type of alteration observed in the fibres and its possible impact on a given paper mechanical property are suggested. With similar approaches, the effects of drying and recycling were studied.     

Color Measurement in Leaf Diagnosis

Abstract

The paper presents for the first time in literature the use of color measurement in leaf diagnosis. It uses the data obtained in certain well- established conditions, in CIE 1976 system for quantifying the color changes of leaves in different sufference (plant or leaf damage) symptoms.

The data are presented for sugar beet plants, but the application can be easily extended to any crop, arboretums, or ecological systems.

As a further extension of the study, it can be used in the telediagnosis of plants' sufferences by plane or even by satellite.     

HL-2Aװ���л���ѭ��������ĵ��跢�����������

为在更高参数运行的HL-2A装置上实现等离子体芯部加料,设计了一套基于G-M循环制冷机的25管弹丸注入系统。描述了该系统的构成、工程参数,给出了系统的结构设计,并对各组成部件进行热力分析计算。对枪管温度梯度的建立及控制、弹丸注入方式等进行了讨论。     

高温等离子体中固体弹丸消融过程的研究

本文求得了弹丸消融过程的自洽解析解。结果表明:Parks的弹丸消融理论需要修正;弹丸消融速率由消融物云和表面蒸发层共同控制;入射电子通过消融物云时慢化效应并不显著;消融物离开弹丸表面时一般呈部分电离态;聚变堆条件下,弹丸表面可能会出现激波。     

用光谱学方法研究不同放电等离子体粒子约束

本文用光谱学方法研究在ＨＬ－１装置上ＬＨＣＤ及ＥＣＲＨ等离子体，弹丸注入等离子体，偏压电极与偏压孔栏等离子体粒子约束特性。结果表明：在弹丸注入使用正向偏压电极与偏压孔栏期间，等离子体粒子约束行到改善，较低密度下（＾ｎｅ＜２．０×１０＾１＾３ｃｍ＾－＾３），ＬＨＣＤ脉冲期间粒子约束得到改善；而当密度＾－ｎｅ大于２．０×１０＾１＾３ｃｍ＾－＾３时，等离子体约束变坏。ＥＣＲＨ脉冲期间粒子约束得不到改善。